0 ratings
Vare #:
21313459
MakerHawk 6pcs Optical Endstop With 1M Cable Switch Sensor Photoelectric Light Control Limit Switch Module for 3D Printer
3 Sustainability Highlights
Vare #:
21313459
DKK 139
Prisdetaljer
Eksklusive forsendelses- og toldgebyrer ( Forsendelses- og toldgebyrer beregnes ved checkout )
*Alle varer importeres fra US
0 ratings
Skriv en anmeldelse
På lager
Importeret fra USA butik
QTY:
Kun 20 varer tilbage på lageret.
Bestil nu og få den omkring Lørdag, September 26
Sikker transaktion
Ubuy arbejder hårdt for at beskytte din sikkerhed og dit privatliv. Vores avancerede betalingssikkerhedssystem sikrer fortrolighed ved at kryptere dine oplysninger under transmission ved hjælp af AES (Advanced Encryption Standards) og SSL (Secure Socket Layer) protokoller. Dine betalingsoplysninger er 100% sikre, da vi ikke deler dine betalingsoplysninger med tredjepartssælgere.
Vores bedste logistikpartnere
MakerHawk Optical Endstop is a sensitive, quiet and high repeatability sensor with no mechanical collision. It uses optically transmissive principles of design, which results in no loss, no noise and longer life.
Hurtig
levering
Gratis
returnering*
Sikker emballering
100 % originale produkter'
PCI DSS Compliance
ISO 27001 Certified
Note: Step Down Voltage Transformer required for using electronics products of US store (110-120). Recommended power converters Køb nu.
Hvad der skiller sig ud
Precision Control
The MakerHawk optical endstop provides high accuracy in detecting limits for 3D printers, enhancing print precision and reducing the risk of errors during operation.
Easy Installation
Featuring a 1M cable, these limit switch modules ensure a hassle-free setup, allowing users to integrate them effortlessly into their 3D printer without complicated wiring.
Durable Design
Crafted for longevity, the MakerHawk endstop modules are built to withstand the rigors of continuous use, ensuring reliable performance over time, making them a valuable investment for every 3D printer enthusiast.
Produktdetaljer
- Compact and sensitive optical endstop module for 3D printers
- Operates at VCC: 2.7V to 5V with a trigger that is quiet and sensitive
- Utilizes optically transmissive design for a longer life and no mechanical collision
- Output low level when not triggered and high level when triggered
- Includes 6pcs optical endstop switches and 6pcs 3-pin XH2.54 connection wires
- Each switch is lightweight, weighing only 2.4 ounces
| Operation Mode | automatic |
| Operating Voltage | 5 volts |
| Contact Type | Normally Open |
| Connector Type | Optical |
| Switch Type | Limit Switch |
| Terminal | Physical |
| Circuit Type | 1-way |
| Mounting Type | Panel Mount |
| Actuator Type | Plunger |
| Number of Positions | 6 |
| Control Method | Touch |
| Connectivity Protocol | X-10 |
| Compatible Devices | 3D Printer |
| Color | 6pcs Optical Endstop |
| Item Dimensions | 1.38 x 0.43 x 0.39 inches (3.5 x 1.1 x 1 cm) |
| Unit Count | 1 Count |
| Number of Items | 1 |
| Material Type | Copper |
| Contact Material | Copper |
| International Protection Rating | IP54 |
| Brand Name | MakerHawk |
| Model | 2HW144083OG5A |
| Manufacturer | MakerHawk |
| UPC | 673400167101 |
| Part Number | 2HW144083OG5A |
| Brand | MakerHawk |
| Material | Copper |
| Item dimensions L x W x H | 1.38 x 0.43 x 0.39 inches (3.5 x 1.1 x 1 cm) |
Hvem bør købe?
-
3D Printing Enthusiasts
Ideal for hobbyists needing precise limit switches for upgraded functions in their 3D printers.
-
DIY Electronics Projects
A great addition for makers implementing automation and control in various DIY electronic projects.
-
Education and Training
Suitable for students learning about sensors and automation in educational environments or workshops.
-
Casual Users
Not ideal for those who rarely use 3D printers and need basic functionality without modifications.
Produktbeskrivelse
Sustainability Highlights
This product has sustainability features recognized by trusted certifications.
Recycled materials
Contains at least 50% recycled material. As certified by
Global Recycled Standard (GRS) certified products contain recycled content (>50%) that has been independently verified at each stage of the supply chain, from the source to the final product and meet social, environmental, and chemical requirements. The purchase of Global Recycled Standard (GRS) certified products supports the use of recycled content in the supply chain. Learn more about this certification
- Certification Body
- Intertek
- Certification Number
- TE-00339748
Safer chemicals
Made with chemicals safer for human health and the environment. As certified by
Global Recycled Standard (GRS) certified products contain recycled content (>50%) that has been independently verified at each stage of the supply chain, from the source to the final product and meet social, environmental, and chemical requirements. The purchase of Global Recycled Standard (GRS) certified products supports the use of recycled content in the supply chain. Learn more about this certification
- Certification Body
- Intertek
- Certification Number
- TE-00339748
Worker well-being
Manufactured on farms or in facilities that protect the rights and/or health of workers. As certified by
Global Recycled Standard (GRS) certified products contain recycled content (>50%) that has been independently verified at each stage of the supply chain, from the source to the final product and meet social, environmental, and chemical requirements. The purchase of Global Recycled Standard (GRS) certified products supports the use of recycled content in the supply chain. Learn more about this certification
- Certification Body
- Intertek
- Certification Number
- TE-00339748
Har du spørgsmål? Chat med os
Kundespørgsmål og svar
-
spørgsmål:
What is the purpose of the MakerHawk Optical Endstop?
svar: The MakerHawk Optical Endstop serves as a limit switch module for 3D printers, ensuring precise stopping points on the print bed. It employs photoelectric sensing technology to detect the position of the moving components. This type of sensor minimizes mechanical wear and increases reliability, making it ideal for printers that require accurate positioning during the printing process. -
spørgsmål:
How does the photoelectric light control work in this endstop module?
svar: The photoelectric light control in the MakerHawk endstop operates by utilizing an infrared light beam. When an object, such as the printer's moving part, interrupts this beam, the sensor triggers a response. This reliable detection method is not only faster than mechanical switches but also enhances the longevity of your 3D printer components by reducing physical contact. -
spørgsmål:
Can I install the MakerHawk Optical Endstop on different 3D printer models?
svar: Yes, the MakerHawk Optical Endstop is designed to be compatible with a variety of 3D printer models. This module can be configured for different setups and is particularly beneficial for users who want to upgrade their printers for better accuracy. Ensure that your printer's firmware supports optical limit switches for optimal functionality. -
spørgsmål:
What kind of cable is included with the MakerHawk Optical Endstop?
svar: The MakerHawk Optical Endstop comes with a 1M cable that allows for flexible installation. This length is ideal for standard 3D printer setups, enabling you to position the endstop effectively without unnecessary constraints. The cable is designed for durability and performance, ensuring stable connections over time. -
spørgsmål:
What are the benefits of using optical over mechanical endstops?
svar: Optical endstops like the MakerHawk module provide several advantages over traditional mechanical switches, including reduced wear and tear, faster response times, and higher precision in position detection. They eliminate the need for physical contact, which often leads to degradation in mechanical switches. Consequently, users can expect quieter operation and improved long-term accuracy. -
spørgsmål:
How should I configure the endstop in my 3D printer's firmware?
svar: To configure the MakerHawk Optical Endstop in your 3D printer's firmware, you'll typically need to access the configuration files, often Marlin or similar. Look for endstop settings where you can specify the type as 'optical'. Following specific guidelines from your printer's documentation can help streamline the setup process, ensuring the sensor works effectively for print jobs. -
spørgsmål:
Is the MakerHawk Optical Endstop suitable for large-scale 3D printing?
svar: Absolutely! The MakerHawk Optical Endstop is well-suited for large-scale 3D printing applications. Its precise detection capabilities help maintain consistency and accuracy across larger builds, which is particularly important when working with bigger volume projects. Users often appreciate how it can enhance the overall reliability in dimensional tolerances. -
spørgsmål:
What should I do if my Optical Endstop is not detecting movement?
svar: If your MakerHawk Optical Endstop fails to detect movement, first check the alignment of the sensor and the target that interrupts the light beam. Ensure they are positioned correctly and that there are no obstructions. Additionally, inspect the wiring and connections for any damage or loose ends, as these can affect functionality. Reference your printer's documentation for troubleshooting steps specific to your model. -
spørgsmål:
Can the MakerHawk Optical Endstop be used for applications other than 3D printing?
svar: Yes, while primarily designed for 3D printers, the MakerHawk Optical Endstop can be utilized in various applications requiring position detection. This includes CNC machines, robotic arms, or any other projects where precise stop points are necessary. The adaptability of this sensor module allows hobbyists and professionals alike to explore innovative uses across different projects. -
spørgsmål:
Where can I buy MakerHawk 6pcs Optical Endstop With 1M Cable Switch Sensor Photoelectric Light Control Limit Switch Module for 3D Printer?
svar: You can buy the MakerHawk 6pcs Optical Endstop with a 1M cable from Ubuy in Greenland. Ubuy offers a reliable platform for purchasing electronic components, including this limit switch module, ensuring you receive quality products that enhance your 3D printing experience.
MakerHawk 3D Printer Accessories Editorial Review
MakerHawk 6pcs Optical Endstop With 1M Cable Switch Sensor Photoelectric Light Control Limit Switch Module for 3D Printer are a solid choice for enhancing the performance of your 3D printer. Users have praised their reliability and ease of integration with various systems. For example, one user successfully connected them to a Raspberry Pi 4, benefiting from their responsiveness even with different filament types. Additionally, these limit switches feature an automatic operation mode, 5 volts operating voltage, and are designed for simple panel mounting, making them highly adaptable. The compact dimensions of 1.38 x 0.43 x 0.39 inches also make them a practical addition in limited spaces, ensuring efficient performance in various applications.
Kundeanmeldelser & vurderinger
145 kundebedømmelser
-
5 stjerne
84%
-
4 stjerne
10%
-
3 stjerne
3%
-
2 stjerne
1%
-
1 stjerne
2%
Anmeld dette produkt
Del dine tanker med andre kunder
Fordele
- Reliable for CNC Router homing enhancements
- Easily connects to Raspberry Pi 4
- Effective detection of multiple filament types
- Compact design fits limited spaces
Ulemper
- May require adjustment for optimal detection
Platformstillid & Køberens Tillid
JK
Jasmin
Verificeret køber
“Great products and very good service: very easy and very fast international delivery.”
9 September 2026 · via Trustpilot
AG
Anke
Verificeret køber
“Wonderful online shopping experience, smooth transaction from the start. Payment method works conveniently and delivery is unexpectedly fast and reliable. You go the extra mile for service. What makes this even more amazing, you deliver to Namibia. I will remain a happy Ubuy customer and will increase my purchases for sure! Thank you!”
10 September 2026 · via Trustpilot
H
Hazel
Verificeret køber
“Very easy to find the products what you need, and so fast delivery, that’s why I highly recommended to others costumers to used ubuy.”
10 September 2026 · via Trustpilot
O
Opaleye
Verificeret køber
“I received exactly what I ordered I was skeptical about your site because that was my first time to order. But the order came timely and neatly packaged. I was not disappointed. Thank you.”
11 September 2026 · via Trustpilot
AC
Adele
Verificeret køber
“Easy to find and order what you want on the website. Delivery is quick to the UK”
8 September 2026 · via Trustpilot
Sikker betaling
Global levering
Nem returnering
Originale produkter
Produktets prishistorik
Vigtig information
- Begrænsninger: For produkter, der forsendes internationalt, bemærk venligst, at eventuel producentgaranti muligvis ikke er gyldig; producentens serviceordninger er muligvis ikke tilgængelige; produktmanualer, instruktioner og sikkerhedsadvarsler er muligvis ikke på destinationslandets sprog; produkterne (og det medfølgende materiale) er muligvis ikke designet i overensstemmelse med destinationslandets standarder, specifikationer og mærkningskrav; og produkterne opfylder muligvis ikke destinationslandets krav til spænding og andre elektriske standarder (hvilket kan kræve brug af en adapter eller transformer, hvis relevant). Modtageren er ansvarlig for at sikre, at produktet lovligt kan importeres til destinationslandet. Ved bestilling hos Ubuy eller dets datterselskaber er modtageren importøren og skal overholde alle love og regler i destinationslandet.
- Det er ikke alle de produkter som vises på Ubuy som er til salg, idet Ubuy er en global søgemaskine. Produkterne er underlagt eksport-/handelsregler.
DKK 139
Bestil nu og få den omkring Lørdag, September 26
Dette produkt er ikke begrænset i mit land. (Klik venligst på linket ovenfor, hvis dette produkt ikke er begrænset i dit land, så vil vores team gennemgå det og godkende det.)
QTY:
Kun 20 varer tilbage på lageret.
Sikker transaktion
PCI DSS-kompatibel og ISO 27001:2022-certificeret, med krypteret betaling og fuld køberbeskyttelse på hver ordre
Vores bedste logistikpartnere
Hurtigste grænseoverskridende levering
Egenskaber og fordele
- Sensitive and quiet optical switch sensor
- High repeatability with no mechanical collision
- Optically transmissive principles of design with longer life
- Output low level when there is no trigger and high level when there is trigger
- Can be triggered using a stopper in the middle of the red contact groove
- Suitable for 3D printers
Ubuy-garanti
Oplev bekymringsfri shopping med 100 % originale produkter, PCI DSS-kompatibel betalingssikkerhed, ISO 27001-certificeret databeskyttelse, den hurtigste grænseoverskridende levering, gratis returnering* og sikker emballage på hver ordre.